While no new releases are being made available, we have gathered the final versions of CobraNet Silicon Series software for your convenience.
CobraNet Discovery (“Disco”) is a monitoring, troubleshooting and maintenance tool for CobraNet networks. Disco runs on Windows (NT, XP and Vista) computers and uses the standard Ethernet network interface (NIC) to connect to and observe a CobraNet network. CobraNet devices on the network are discovered and enumerated in the application. Critical performance parameters are retrieved from the devices and displayed. Devices can be selected and over-the-network firmware upgrades initiated from the application.
DSP Conductor™ is a software development kit (SDK) for audio digital signal processing (DSP) applications. Audio processing is defined in terms of code elements. Elements have inputs, outputs, controls and indicators. Elements are “wired” together and their controls adjusted within the DSP Conductor environment to produce the desired audio processing results within the DSP code that is generated. DSP Conductor generates the signal processing instructions (code) but the actual audio processing is performed by a Cirrus Logic DSP chip. The CS4961xx CobraNet®-enabled network audio processor is the first of these DSP devices to be supported by DSP Conductor.
Firmware may be updated though the Ethernet connection from a Windows PC running CobraNet Discovery. Unzip contents into the “firmware” directory beneath your CobraNet Discovery installation (default location: c:\Program Files\Cirrus Logic\CobraNet Discovery)
Discover the benefits of CobraNet technology with our collection of white papers and application notes. Explore developer tips, design guides, and case studies covering a range of topics such as networked audio system design, digital synchronization, and controlling audio systems with SNMP. These resources serve as a valuable reference for existing customers, allowing them to maximize their investment in CobraNet.
CobraCAD Version 1.10 is now available for download. CobraCAD requires Windows 98/ME/NT4/2000/XP with Internet Explorer 5.0 or later. If you already have a previous version installed, you will need to run the installer application twice. The first time will remove the previous version and the second time will install Version 1.10. Be sure to check the help file for “known issues” relating to this software release.